Universal Trading Company is sole authorized distributor of Kale Conveyor belts in Pakistan. Kale Conveyor is one of the best conveyor belt and rubber products manufacturer in Turkey.
KALE combines its ongoing production experience with current production technologies since 1975 and reflects this combination on its products with the principle of continuity in quality. Our facilities produce about 8.000 m on a daily basis and more than 80% of this production is exported to more than 140 countries all over the World. High quality production, on time delivery, continuous customer satisfaction are our utmost priorities.
- Abrasion Resistant Belts
2. Oil Resistant Belts
3. Heat Resistant Belts
4. Flame Retardant Belts
5. Profiled Belts
6. Rubber Sheets
7. Elevator Belts
8. Side Skirts
Such type of belts are usually used in crusher sites, sand pits, cement factories, port of loading and unloading, power plants, road constructions, coal mines, iron-steel factories, factories proccessing agricultural products, sugar factories, stone and lime quarries, loading – unloading units of factories.
Features:
- Produced with the combination of NR/SBR/BR based materials.
- Used in conveying abrasive and coarse-grained materials.
- Resistant to impacts.
- Operating temparature is between -30°C and + 70°C.
- Resistant to ozone.
- Produced in accordance with DIN 22102 and TS EN ISO 14890 norms.
| CLASS | ELASTOMER | CONTINUOUS WORKINGTEMPERATURE | ABRASION (mm3)(TS ISO 4649 METHOD-A) | HARDNESS (SHORE A)(TS EN ISO 868) | TENSILE STRENGTH (Mpa)(TS ISO 37 TYPE-3) |
|---|---|---|---|---|---|
| N | NR/SBR | -30°C-75°C | 150 | 65±5 | 17 Mpa |
| Y | NR/SBR | -30°C-75°C | 150 | 65±5 | 20 Mpa |
| X | NR/SBR | -30°C-75°C | 120 | 65±5 | 25 Mpa |
| W | NR/BR | -30°C-75°C | 90 | 65±5 | 18 Mpa |
| Z | NR/SBR | -30°C-75°C | 200 | 65±5 | 15 Mpa |
| RMA1 | NR/SBR | -30°C-75°C | 150 | 65±5 | 17 Mpa |
| RMA2 | NR/SBR | -30°C-75°C | 200 |
Usage Areas:
Such type of belts are used in chemical substances manufacturing factories, synthetic and organic fertilizer production, transport facilities, sugar factories and recycling plants.
Features:
- They are produced based on nitrile rubber.
- It is resistant to oil, grease, some acids and various petroleum products.
- It works at temperatures between -30°C and + 80°C.
- Upon request, belts resistant to + 110°C are also produced.
- It is produced in accordance with DIN 22102 and TS EN ISO 14890 norms.
- It is tested with IRM 901, IRM 902 and IRM 903 Oils in TS ISO 1817 norms.
| CLASS | ELASTOMER | CONTINUOUS WORKING TEMPERATURE | ABRASION (mm3) (TS ISO 4649 METHOD-A) | HARDNESS (SHORE A)(TS EN ISO 868 | TENSILE STRENGTH (Mpa)(TS ISO 37 TYPE-3) | CHANGE IN VOLUME(22 hr 70 C )IRM 901 (TS EN ISO 1817) | CHANGE IN VOLUME(22 hr 70 C )IRM 903 (TS EN ISO 1817) | CHANGE IN VOLUME(72 hr 70 C )IRM 903 (TS EN ISO 1817) |
|---|---|---|---|---|---|---|---|---|
| OR | NBR | -30°C – 80°C | 160 | 67±5 | 18 mpa | 5% | 10% | 30% |
| MOR | SBR/NBR | -30°C – 80°C | 160 | 67±5 | 17 mpa | 10% | 20% | 50% |
| Super-OR | NBR | -30°C – 80°C | 160 |
Useage of Areas:
They are used in foundries, iron-steel factories, brick and tile factories, ceramic factories, cement factories, thermal power plants, lime quarries, mines, factories which make production in high temperature and wet environments.
Features:
- This type of EPDM
rubberbased T belts (heat resistant) generally are used for conveying hot materials. - Highly resistant to acids, ozone and oxygen.
- Belt surface temperature can resist up to 200°c.
| CLASS | ELASTOMER | CONTINUOUS WORKINGTEMPERATURE (TS 4195) | ABRASION (mm3)(TS ISO 4649 METHOD-A) | HARDNESS(SHORE A) (TS EN ISO 868 | TENSILE STRENGTH (Mpa)(TS ISO 37 TYPE-3) |
|---|---|---|---|---|---|
| T1 | SBR | 100 C° | 150 | 66±5 | 17 mpa |
| T2 | SBR | 125 C° | 130 | 66±5 | 18 mpa |
| T3 | EPDM | 150 C° | 165 |
USAGE AREAS
Flame Reatardent Belts are used in underground mines, in flammable environments and in factories that produce special products.
FEATURES
• They are produced using chlorine based products.
• They are divided into 2 categories : for underground and for opencast/surface usage.
• Produced for opencast mining in accordance with the TS EN 12882 norm.
• Produced for underground mining in accordance with TS EN 14973 norm.
• They exhibit flame resistance and are generally used for this purpose.
• They are resistant up to 80C operating temperature.
| CLASS | ELASTOMER | CONTINUOUS WORKINGTEMPERATURE | ABRASION (mm3)(TS ISO 4649 METHOD-A) | HARDNESS (SHORE A)(TS EN ISO 868 | TENSILE STRENGTH (Mpa)(TS ISO 37 TYPE-3) | USAGE AREA | FLAMMABILITY STANDARDS |
|---|---|---|---|---|---|---|---|
| TYPE-K (2A) | CR/SBR | -30 C° -+ 80 C° | 170 | 66±5 | 16 Mpa | Above Ground | TS EN ISO 340 TS EN 12882 |
| TYPE-S (2B) | CR/SBR | –30 C° -+ 80 C°C | 170 | 66±5 | 16 Mpa | Above Ground | TS EN ISO 340 TS EN 12882 |
| TYPE-K (3A) | CR/SBR | -30 C° -+ 80 C° | 220 | 66±5 | 15 Mpa | Above Ground | TS EN ISO 340 TS EN 12882 TS EN ISO 20238 |
| TYPE-S (3B) | CR/SBR | -30 C° -+ 80 C° | 220 | 66±5 | 15 Mpa | Above Ground | TS EN ISO 340 TS EN 12882 TS EN ISO 20238 |
| V-C1 | CR | -30 C° -+ 80 C° | 175 | 70±5 | 17 Mpa | Underground | TS EN 14973 TS EN ISO 340 EN ISO 12881-1 TS EN ISO 20238 |
| V-A1 | CR | -30 C° -+ 80 C° | 175 | 70±5 | 17 Mpa | Underground | TS EN 14973 TS EN ISO 340 EN ISO 12881-1 TS EN ISO 20238 |
| L-C1 | CR | -30 C° -+ 80 C° | 200 | 70±5 | 15 Mpa | Underground | TS EN 14973 TS EN ISO 340 EN ISO 12881-1 TS EN ISO 20238 |
| L-A1 | CR | -30 C° -+ 80 C° | 200 |
USAGE AREAS
Flame Reatardent Belts are used in underground mines, in flammable environments and in factories that produce special products.
FEATURES
• They are produced using chlorine based products.
• They are divided into 2 categories : for underground and for opencast/surface usage.
• Produced for opencast mining in accordance with the TS EN 12882 norm.
• Produced for underground mining in accordance with TS EN 14973 norm.
• They exhibit flame resistance and are generally used for this purpose.
• They are resistant up to 80C operating temperature.
| CLASS | ELASTOMER | CONTINUOUS WORKINGTEMPERATURE | ABRASION (mm3)(TS ISO 4649 METHOD-A) | HARDNESS (SHORE A)(TS EN ISO 868 | TENSILE STRENGTH (Mpa)(TS ISO 37 TYPE-3) | USAGE AREA | FLAMMABILITY STANDARDS |
|---|---|---|---|---|---|---|---|
| TYPE-K (2A) | CR/SBR | -30 C° -+ 80 C° | 170 | 66±5 | 16 Mpa | Above Ground | TS EN ISO 340 TS EN 12882 |
| TYPE-S (2B) | CR/SBR | –30 C° -+ 80 C°C | 170 | 66±5 | 16 Mpa | Above Ground | TS EN ISO 340 TS EN 12882 |
| TYPE-K (3A) | CR/SBR | -30 C° -+ 80 C° | 220 | 66±5 | 15 Mpa | Above Ground | TS EN ISO 340 TS EN 12882 TS EN ISO 20238 |
| TYPE-S (3B) | CR/SBR | -30 C° -+ 80 C° | 220 | 66±5 | 15 Mpa | Above Ground | TS EN ISO 340 TS EN 12882 TS EN ISO 20238 |
| V-C1 | CR | -30 C° -+ 80 C° | 175 | 70±5 | 17 Mpa | Underground | TS EN 14973 TS EN ISO 340 EN ISO 12881-1 TS EN ISO 20238 |
| V-A1 | CR | -30 C° -+ 80 C° | 175 | 70±5 | 17 Mpa | Underground | TS EN 14973 TS EN ISO 340 EN ISO 12881-1 TS EN ISO 20238 |
| L-C1 | CR | -30 C° -+ 80 C° | 200 | 70±5 | 15 Mpa | Underground | TS EN 14973 TS EN ISO 340 EN ISO 12881-1 TS EN ISO 20238 |
| L-A1 | CR | -30 C° -+ 80 C° | 200 |